Geist G1421 Manuel d'instructions télécharger pdf (Page 14)

GM1111

Revision Date 6/22/2012

Initial Setup

Connect the RCX, RCO, RCM-O or RCU-O series unit to your computer using a crossover cable

or hub/switch.

Windows XP

On your computer, go to “Start > Settings > Control Panel > Network and Dial Up

Connections”

Right click on “Local Area Connection” and select “Properties”

Select “Use the following IP address”. Use these settings:

 IP Address: 192.168.123.1

 Subnet Mask: 255.255.255.0

 Gateway: Leave blank

Click “OK” twice.

The unit should now be accessible in a web browser via the unit’s permanent IP address:

http://192.168.123.123/. See Unit Configuration (page 28) for details.

Figure 14: Windows XP network settings for initial setup.

MacOS X 10.5 and 10.6

Open System Preferences via the Dock or the Apple menu.

Select “Network” under “Internet & Network.”

Select “Ethernet” from the list on the left side of the window and enter these settings on the

right side of the window:

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

Pas de commentaire

Geist G1421 Manuel d'instructions Page 14